269
2. SAFETY INSTRUCTIONS
EN
tew( snoitidnoc yreppils ni nekat eb tsum erac laicepS .noitarepo gnirud
selcatsbo neddih rof hctaW .niarret nworgrevo ,tluc
such as tree stumps, roots and ditches to avoid stumbling. For better footing,
clear away scrub and cuttings. Be extremely cautious when working on slopes
or uneven ground.
stop switch towards «STOP». Never put the machine down with the engine
running.
eht htiw level dnuorg ta desu eb ot yllamron si rettuc hsurb/remmirt sihT •
cutting attachment parallel to the ground. Use of a trimmer/brush cutter above
ground level or with the cutting attachment perpendicular to the ground may
increase the risk of injury, since the cutting attachment is more fully exposed
cult to control.
tnemhcatta gnittuc eht fo noitidnoc eht dna ssenthgit eht kcehc ,gnittuc gniruD •
at regular short intervals with the engine and attachment stopped.
eert ,sgnidliub fo sedis ,secnef ot esolc gnittuc diova ,sedalb digir gnisu nehW •
trunks, stones or other such objects that could cause the power tool to kick back
or could cause damage to the blade.
eht fI • trimmer head,
the engine and make sure the cutting attachment has stopped before cleaning.
regular intervals.
od ,yrujni nrub fo ksir eht ecuder oT .noitarepo gnirud toh semoceb xobraeg ehT •
not touch the gear housing when it is hot.
become hot during operation and remain hot for a while after stopping the
engine. To reduce
er and other parts
er clean. Remove excess
lubricant and all debris such as pine needles, branches or leaves. Let the engine
cool down sitting on concrete, metal, bare ground or solid wood (away from
any combustible substances, such as dry bush, grass or wood chips.
reveN .noitcetorp eye devorppa raew syawlA .stcejbo nworht rof tuo hctaW •
lean over the cutting attachment guard. Stones, rubbish, etc. can be thrown up
into the eyes causing blindness or serious injury.
To Next Page
Loading...
Need help?
General
