STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 5020, rev.03 07/2021 - SC/VHS 10
5.6.4 Electrical Connections (If any)
Before carrying out electrical connections, switch off any power and control lines.
Use components appropriate as for type, material and dimensions.
The connections should be made by qualified staff.
- Introduce connection cables.
- Make the connections in compliance with applicable wiring diagrams on the documentation
supplied.
- Screw the cable gland.
- Replace the plastic plugs of unused entries with metal plugs.
5.6.5 Earthing connection
If the earthing connection is not guaranteed trough mechanical parts where actuator is mounted, it
is necessary ensure a directly earthing connection on provided point of actuator.