To Next Page

To Previous Page

STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com

Manual 5020, rev.03 07/2021 - SC/VHS 22

8.5 Hydraulic Fluid

Recommended hydraulic fluids to operate the SC/VHS actuators are listed

here below.

Equivalent fluids can be used provided they have the same characteristics

of the below recommended fluids.

AGIP ARNICA 22

AEROSHELL Fluid 41

To be used in standard temperature

conditions: (-20°C/+100°C

Manufacturer: Agip

Viscosity at 40°C: 22 cSt

Viscosity at 100°C: 4,94 cSt

Viscosity Index: 157

Flash point COC: 192 °C

Pour Point: < -39 °C

Mass density at 15°C: 0,857 Kg/l

To be used in low temperature conditions:

-60°C/+100°C

Manufacturer: Shell

Viscosity at 40°C: 14,1 cSt

Viscosity at 100°C: 5,30 cSt

Viscosity Index: > 200

Flash point COC: 105 °C

Pour Point: < -60 °C

Mass density at 15°C: 0,87 Kg/l

Questions and Answers:

Need help?

Do you have a question about the STI SC Series and is the answer not in the manual?

STI SC Series Specifications

General