OPERATION
Settings and displays
66 | DHE www.stiebel-eltron.com
4.9 Settings in the parameter menu
4.9.1 Activating the parameter menu
Briefly press and hold "i" for more than 5seconds until "P1"
appears, then continue by briefly pressing "i".
In the selected parameter menu, turn the temperature selec-
tor to the required display/ setting.
4.9.2 Parameter menu
Menu Description Selectable display |
setting
Explanations Symbol |
display
P1
ECO water and energy
saving function
OFF | ECO1 | ECO2 | ECO3
The ECO function enables you to limit the flow rate to a maximum
value.
Flow rate limit:
8l/min with "ECO1" | 7l/min with "ECO2" | 6l/min with "ECO3" |
No flow rate limit with "OFF".
|
|
|
P2
Temperature limit Tmax
OFF | 20.0 | 20.5 ...°C or
68 | 69 ...°F
The temperature limit allows you as a user to restrict the adjustable
set temperature at the appliance to a maximum value. Check that the
upper temperature limit has been correctly applied.
Your qualified contractor can set an additional temperature limit for
anti-scalding protection. This temperature then dictates the upper
limit of the setting range for the temperature limit function.
To Next Page
Loading...
Need help?
General
