OPERATION
Appliance description
62 | DHE www.stiebel-eltron.com
!
WARNING Injury
The appliance may be used by children over 3years of
age and persons with reduced physical, sensory or men-
tal capabilities or a lack of experience and expertise,
provided that they are supervised or they have been
instructed on how to use the appliance safely and have
understood the potential risks. Children must never play
with the appliance. Cleaning and user maintenance must
not be carried out by children without supervision.
!
Material losses
The user should protect the appliance and its tap against
frost.
2.3 Test symbols
See type plate on the appliance.
2.4 EU Declaration of Conformity
Note
DHE: STIEBELELTRON hereby declares that the radio
equipment type complies with Directive 2014/53/EU. The
full text of the EU Declaration of Conformity can be found
at the following internet address:
www.stiebel-eltron.de/downloads
3. Appliance description
The appliance switches on automatically as soon as you open the
hot water valve on the tap. When you close the tap, the appliance
switches off again automatically.
The appliance heats water as it flows through it. The set tempera-
ture is adjustable. Upwards of a certain flow rate, the control unit
selects the required heating output, subject to the temperature
selected and the cold water temperature.
The instantaneous water heater with full electronic control and
automatic output matching maintains a consistent outlet tempera-
ture. The fully electronic control unit with motorised valve ensures
the water is accurately heated to the selected temperature. This
occurs regardless of the inlet temperature.
If the appliance is operated with preheated water and the inlet
temperature exceeds the selected temperature, the inlet tempera-
ture is indicated on the second display line and flashes. The water
is not heated further.
You can store different set temperatures and call them up quickly.
In the ECO function, the integral motorised valve limits the flow
rate to 3preset levels. The appliance has setting options for a
temperature limit (Tmax function, user) and internal anti-scald-
ing protection (qualified contractor). The backlight switches on
automatically as soon as water starts to flow through the appli-
ance or you make a change on the user interface. The backlight
switches off automatically after water stops flowing or if no action
is performed.
To Next Page
Loading...
Need help?
General
