Name: STIEBEL ELTRON DHE 18
Brand: STIEBEL ELTRON
Rating: 4 (1 reviews)

To Next Page

To Previous Page

INSTALLATION

Installation

76 | DHE www.stiebel-eltron.com

Permissible water line materials

- Cold water inlet line:

Pipes made from galvanised steel, stainless steel, copper or

plastic

- DHW outlet line:

Pipes made from stainless steel, copper or plastic

Material losses

If plastic pipework systems are used, take into account

the maximum inlet temperature and the maximum per-

missible pressure.

Flow rate

 Ensure that the ﬂow rate for switching on the appliance is

achieved.

 If the required ﬂow rate is not achieved when the draw-off

valve is fully open, increase the water line pressure.

10. Installation

Factory settings DHE 18/21/24 DHE 27

Internal anti-scalding protection °C 60 60

Connected load kW 21 27

Adjustable connected load x -

Standard installation DHE 18/21/24 DHE 27

Electrical connection from below on

unfinished walls

x x

Water connection on unfinished walls x x

For further installation options, see chapter "Alternative instal-

lation methods".

10.1 Standard installation

Opening the appliance

D0000053271

Other manuals for STIEBEL ELTRON DHE 18

Questions and Answers:

Need help?

Do you have a question about the STIEBEL ELTRON DHE 18 and is the answer not in the manual?

General