INSTALLATION
Installation options
96 |DHEConnect | DHETouch www.stiebel-eltron.com
D0000056234
12
1 Wireless adaptor button for registering and deregistering
2 Yellow LED illuminates when mini wireless remote control is
active
To start mini wireless remote control registration, briefly
press the wireless adaptor button in the appliance. The yel-
low LED starts to flash. The wireless adaptor remains in pair-
ing mode for 30seconds.
Now press the plus (+) button on the mini wireless remote
control for 3seconds. The red mini wireless remote control
LED indicates learn telegram sending.
The yellow LED on the wireless adaptor flashes in pairing mode.
Once learning is completed successfully, the yellow LED flashes
twice. If learning was unsuccessful, the LED continues to flash until
pairing mode ends (30seconds in total).
13.15 Registering DHE programming unit as wireless
remote control
If the programming unit is used outside the appliance with acces-
sories and the appliance is closed with the dummy cap, then you
must open the appliance for programming unit learning.
D0000056234
12
1 Wireless adaptor button for registering
2 Yellow LED illuminates when programming unit active
Activate the "Settings/ Service/ Wireless/ Log on program-
ming unit" menu item on the programming unit.
Briefly press the wireless adaptor button in the appliance.
The yellow LED starts to flash. The wireless adaptor remains
in pairing mode for 30seconds.
Press the "OK" button on the programming unit.
To Next Page
Loading...
Need help?
General
