EasyManua.ls Logo

STIEBEL ELTRON DHE Connect 18 - Page 49

STIEBEL ELTRON DHE Connect 18
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
www.stiebel-eltron.com  DHEConnect | DHETouch | 105
INSTALLATION
Specication
17.5 Pressure drop
Taps/valves
Tap pressure drop at a flow rate of 10 l/min
Mono lever mixer tap, approx. MPa 0.04 - 0.08
Thermostatic valve, approx. MPa 0.03 - 0.05
Shower head, approx. MPa 0.03 - 0.15
Sizing the pipework
When calculating the size of the pipework, an appliance pressure
drop of 0.1MPa is recommended.
17.6 Fault conditions
In the event of a fault, loads up to 80 °C at a pressure of 1.0 MPa
can occur briefly in the installation.
17.7 Test symbols
See type plate on the appliance.
17.8 Energy consumption data
The product data complies with EU regulations relating to the
Directive on the ecodesign of energy related products (ErP).
DHE Connect 18/21/24 DHE Connect 27 DHE Touch 18/21/24 DHE Touch 27
234467 234468 234459 234460
Manufacturer STIEBEL ELTRON STIEBEL ELTRON STIEBEL ELTRON STIEBEL ELTRON
Load profile S S S S
Energy efficiency class A A A A
Annual power consumption kWh 480 481 480 481
Energy conversion efficiency % 39 39 39 39
Default temperature setting °C 60 60 60 60
Sound power level dB(A) 15 15 15 15
Special information on measuring effi-
ciency
Data at Pmax. Measured with flow limita-
tion to 9 l/min
Data at Pmax. Measured with flow limita-
tion to 9 l/min

Other manuals for STIEBEL ELTRON DHE Connect 18

Related product manuals