STIEBEL ELTRON DHM 3 - 9 Specification; Dimensions and Connections

www.stiebel-eltron.com DHM | 29
ENGLISH
INSTALLATION
Specication
Cleaning the strainer
You can clean the fitted strainer after removing the cold water
supply pipe.
26�02�05�0065�
Checking the earth conductor
 Check the earth conductor (in Germany e.g. BGV A3) on the
earth conductor contact of the power cable and on the appli-
ance connector.
Appliance storage
 Store the dismantled appliance in a room free from the risk
of frost, as water residues remaining inside the appliance can
freeze and cause damage.
Replacing the power cable for the DHM 6
 If replacing the cable for the DHM6, use a power cable with
4mm² cross-section
9. Specification
9.1 Dimensions and connections
95
28
30
120
143
190
4,8
165
82
20
b02
b03
c06
c01
D0000018336
DHM
b02 Entry electrical cablesI
b03 Entry electrical cablesII
c01 Cold water inlet Male thread G 3/8 A
c06 DHW outlet Male thread G 3/8 A