STIEBEL ELTRON DHM 3 - Application Areas

32 | DHM www.stiebel-eltron.com
INSTALLATION
Specication
Note
An outlet temperature of 50°C can be achieved with the
lowest possible flow rate and the following cold water
inlet temperatures:
- DHM 3 >18°C
- DHM 4 >21°C
- DHM 6 >22°C
- DHM 7 >15°C
9.4 Application areas
For the specific electrical resistance and specific electrical
conductivity, see “Data table”.
Standard specifica-
tion at 15 °C 20°C 25°C
Spec.
resist-
ance
ρ ≥
Spec. conductiv-
ity σ ≤
Spec.
resist-
ance
ρ ≥
Spec. conductiv-
ity σ ≤
Spec.
resist-
ance
ρ ≥
Spec. conductiv-
ity σ ≤
Ωcm mS/m μS/cm Ωcm mS/m μS/cm Ωcm mS/m μS/cm
1100 91 909 970 103 1031 895 112 1117