OPERATION
Installation
24 | DHM www.stiebel-eltron.com
26�02�05�0084
Using pliers, break out the knock-out for the power cable
in the appliance cover. Correct the contours with a file if
necessary.
Use the appliance back panel as a drilling template.
Secure the appliance back panel to the wall with suitable
rawl plugs and screws.
26�02�05�0085
Route the power cable through the cable entry in the back
panel.
Hook in the appliance cover with the heater at the bottom.
Click the heater into place using the snap fastener.
Secure the appliance cover with the cover fixing screws.
To Next Page
Loading...
