STIEBEL ELTRON DHM 3 - Page 37

www.stiebel-eltron.com DHM | 37
ENGLISH
INSTALLATION
Installation



26�02�05�0085
 Route the power cable through the cable entry in the back
panel.
 Hook in the appliance cover with the heater at the bottom.
 Click the heater into place using the snap fastener.
 Secure the appliance cover with the cover fixing screws.
10.2.2 Tap installation
!
Material losses
When making the connections, counter the torque on the
appliance using a size 14 spanner.
Pressurised connection
 Fit the 3/8 connection hose provided and the 3/8 tee.
 Install the tap. For this, also observe the tap operating and
installation instructions.
Non-pressurised connection
 Install the tap. For this, also observe the tap operating and
installation instructions.