STIEBEL ELTRON SNU 10 SLi - Country-Specific Approvals and Certifications; Details on Energy Consumption; Extreme Operating and Fault Conditions; Heat-Up Diagram

20 | SNU 10 SLi | SNU 10 SL GB | SNU 10 SLi AUS www.stiebel-eltron.com
INSTALLATION
Specication
SNU 10 SLi AUS
c06
c01
100
a10
70
a30
a20
i13
14
D0000051569
SNU 10 SLi AUS
a10 Appliance Height mm 503
a20 Appliance Width mm 295
a30 Appliance Depth mm 275
c01 Cold water inlet Male thread G 3/8 A
c06 DHW outlet Male thread G 3/8 A
i13 Wall mounting bracket
Height mm 363
Horizontal hole spacing mm 200
15.2 Wiring diagram
1/N/PE ~ 220 - 240V
LN
85�02�06�0001
15.3 Heat-up diagram
The heat-up period depends on the degree of scaling and residual
heat. For the heat-up time for a cold water supply at 10 °C and a
maximum temperature setting, see the diagram.
35 40 45 50 55 60 65 70 75 80 85
0
5
10
15
20
25
D0000047118
x Temperature in °C
y Duration in min
Example:
Temperature setting: 65°C
Heat-up time approx. 18 min
15.4 Country-specific approvals and certifications
The test symbols can be seen on the type plate.
15.5 Extreme operating and fault conditions
In the case of faults, a peak temperature of up to 100 °C may briefly
occur in the system.
15.6 Details on energy consumption
Product datasheet: Conventional water heaters to regulation (EU)
no. 812/2013 and 814/2013 / (S.I. 2019 No. 539 / Schedule 2)
SNU 10 SLi SNU 10 SL GB SNU 10 SLi
AUS
222199 222198 229468
Versions
Manufacturer STIEBEL ELTRON STIEBEL ELTRON STIEBEL ELTRON
Default tempera-
ture setting
°C 55 55 55
Energy data
Load profile XXS XXS XXS
Energy efficiency
class
A A A
Energy conversion
efficiency
% 36,9 36,9 36,9
Annual power con-
sumption
kWh 500 500 500
Sound data
Sound power level dB(A) 15 15 15