STIEBEL ELTRON WPL E Series User Manual

INSTALLATION
Preparations
www.stiebel-eltron.com WPL E | WPL cool | 9
9.2.2 Indoor installation
≥500
≥300
≥500
≥500
≥1000
D0000019242
 Maintain the minimum clearances to ensure trouble-free op-
eration of the appliance and facilitate maintenance work.
9.3 Preparation of the installation site
General information
 See chapter "Sound emissions".
 Ensure that the appliance is accessible from all sides.
 Ensure that the substrate is level, even, solid and permanent.
9.3.1 Outdoor installation
 Provide a recess (space) in the base to enable supply pipes/
cables to be routed into the appliance from below.
Foundations with recess
4
130
800
50
1240
260 70
1
2
3
d01d02
D0000056558
1 Air discharge
2 Air intake
3 Main wind direction
4 Recess
d01 Heat pump flow
d02 Heat pump return
 Ensure that the foundations offer an adequate recess.
Example: Routing pipes in the base
A
6
8
1 2
7
4
5
3
D0000019237
A Depth of frost line
1 Heating circuit flow
2 Heating circuit return
3 Conduit for supply lines/cables
4 Foundation
5 Gravel bed
6 Drainage pipe
7 Condensate drain hose
8 Electrical cables/leads
1//////////f'///////P
r-----
I
0 0
I
L_f~i
...,. I
-
____ _J
0 0 0 0

STIEBEL ELTRON WPL E Series Specifications

General

Brand	STIEBEL ELTRON
Model	WPL E Series
Category	Heat Pump
Language	English