STIEBEL ELTRON WWK 220 electronic - Siting the Appliance

ENGLISH
www.stiebel-eltron.com WWK 220-300 electronic | 15
INSTALLATION
Preparations
9.4 Siting the appliance
 Carefully undo the cardboard packaging at the clips.
D0000034797
1
1 Cardboard packaging clips
The appliance is secured to the pallet with metal brackets and
screws. The metal brackets are hooked on to the feet underneath
the floor plate of the appliance.
1.
2.
D0000034798
1
1 Metal bracket fixing screw
 Remove the fixing screws of the metal brackets from the
pallet.
 Push the metal brackets a little towards the cylinder centre to
unhook them from the appliance feet.
 Pull the metal brackets out from underneath the appliance.
!
Material losses
Take note of the appliance's weight and centre of gravity.
 Slightly tip the appliance and carefully roll the appliance off
the pallet.
 Position the appliance in the final installation site.
Minimum clearances
≥100
≥350
≥400
≥400
≥500
D0000020783
 Maintain the minimum clearances.
!
Material losses
The appliance must be positioned vertically to avoid
damage.
The feet under the floor plate of the appliance are
height-adjustable.
 Level the appliance horizontally using the height-ad-
justable feet.
D0000034806
314104-38523-9034_WWK_220-300_electronic_en_pl.indb 15 24.02.2015 10:33:36