EN - 11
•
before using the throttle control.
•
both hands,
hand grip and the right hand on the rear hand
grip, even if the operator is left handed.
Stop the machine immediately
if the chain stops during sawing.
6.4.1
6.4.1.a Checking the chain tension
6.4.1.b Checking the oil delivery
IMPORTANT Never use the machine
without lubrication! The oil tank may also
be empty every time the fuel runs out.
Make sure you top up the oil tank every
time you refuel the machine (par. 7.4).
Make sure the bar and the chain are
in place when you check the oil delivery.
.
+
-
position to increase
chain; turn it to
6.4.2
6.4.2.a Delimbing a tree
Make sure there is nothing or anybody
in the area where the branches will fall.
1.
2.
3.
6.4.2.b Felling a tree
IMPORTANT Where two or more persons
are working together on felling and bucking
operations, such operations must be performed
in separate areas at a distance from each
other of at least 2.5 times the height of the tree
being felled. Do not fell trees if this involves
risks of injuring people, coming into contact
with a power line or causing any form of
damage. If the tree should come into contact
with a main power line, report the incident
immediately to the network provider.
clear the area around the tree and
plan obstacle-free escape routes at a 45°
the fall (Fig.
• Performing a face notch
1.
2. Stand to the right of the tree,
3.
•
4.
5.
direction. Do not cut through the hinge.
To Next Page
Loading...
Need help?
General
