To Next PageTo Next PageWhy does my Stiga 966 D Snow Blower engine fail to start?
The engine may fail to start due to several reasons. It could be flooded, in which case you should repeatedly attempt to start it with full throttle and the choke OFF. Alternatively, there might be water in the fuel or the fuel is old; drain the tank and refill it with fresh fuel. Also, check carefully the start procedure according to this manual.
What to do if my Stiga 966 D Snow Blower auger does not rotate?
If the auger does not rotate, it could be due to several reasons. Foreign matter may be blocking it, so clean the auger with the supplied stick. A shear pin might be broken, requiring replacement. The auger drive belt could be slipping, requiring adjustment of the belt and wire, or the belt might be broken and need replacement.
Why does my Stiga 966 D Snow Blower engine start hard or runs poorly?
If your snow blower engine starts hard or runs poorly, it could be due to a faulty spark plug, which should be replaced. Another possibility is that the fuel cap ventilation is blocked; clear the ventilation.
What to do if Stiga 966 D veers to one side?
If the snowthrower veers to one side, it may be because the tire pressure is not equal, so adjust the tire pressure. Another reason could be that only one wheel drives, in which case you should check the wheel locks. Also, the shoes or scraper blade might be unevenly adjusted; adjust the scraper blade and shoes.
What to do if the auger does not stop when the lever is released on my Stiga 966 D Snow Blower?
If the auger does not stop when the lever is released, the auger drive belt or the auger drive guide may be out of adjustment. Adjust the belt or the guide.
General| Brand | Stiga |
|---|---|
| Model | 966 D |
| Category | Snow Blower |
| Language | English |
Read instructions, ensure proper use, and keep bystanders/children away.
Keep clear of moving parts, avoid non-snow removal, be aware of surroundings.
Covers general guidelines, pre-operation checks, and safe fueling.
Procedures for safely shutting down the engine and machine.
Step-by-step instructions for both manual and electric engine starting.
Outlines service items, frequencies, and specific tasks like oil changes and spark plug checks.
Details points and schedule for lubricating various machine components.
A guide listing common issues, their causes, and recommended remedies.
