Stiga Autoclip M3 User Manual

11
User’s manual
EN
SETTING UP OF THE PERIMETER WIRE
Before installing the perimeter wire, it is necessary to check the
entire surface of the lawn. Make any necessary adjustments to the
grassy surface during the laying of the perimeter wire in order to
allow the robot to function correctly.
1. Preparation and dening of the work areas.
2. Installation of the perimeter wire.
3. Installation of the charging station and power supply unit. When
laying the perimeter wire, respect the installation direction
(clockwise) and the rotation direction around the owerbeds
(counter-clockwise), As shown in the gure.
track for laying the perimeter wire

Stiga Autoclip M3 Specifications

General

Brand	Stiga
Model	Autoclip M3
Category	Lawn Mower
Language	English