Stiga Autoclip M3 User Manual

22
User’s manual
EN
SETTING THE USER MENU VIA THE MOBILE APPLICATION
Start the application from your smartphone and access the robot programming menu via the “Setup” function.
Follow the introduction containing a summary of the programming functions available. Details of each function are found in
the pages following the ow diagram. The functions marked with (*) are only available on some models. See the “Technical
Specications” table.
Program
Working time 2
Edge cutting
Determines the second working time of the robot
Schedules the days in which to cut the outer edge.
Working time 1
Working days
Determines the rst working time of the robot
Allows setting the work days and rest days
Setting
Date
Time
Sets the date
Sets the time
Enable
Disable
Rain sensor
Determines the behaviour in case of
rain
Secondary areas
Secondary area 1
Determines the setting for a possible
secondary area 1, indicating the size
of the area, the distance from the
charging station and the direction to
reach it
Percentage
Distance
Direction
SETTINGS – PROGRAMMING MODE
RAIN SENSOR: Function for setting the robot in case of rain.
•
Enable: in case of rain, the robot returns to the station and remains in “charging” mode. At the end of the charging cycle, the
robot only starts mowing again if it has stopped raining.
•
Disable: in case of rain, the robot continues to mow.
DATE: function for setting the date.
TIME: function for setting time.

Stiga Autoclip M3 Specifications

General

Brand	Stiga
Model	Autoclip M3
Category	Lawn Mower
Language	English