Stiga Autoclip M3 - Routine Maintenance; Maintenance Recommendations; Scheduled Maintenance Tasks

27
User’s manual
EN
ROUTINE MAINTENANCE
MAINTENANCE RECOMMANDATIONS
Important
During maintenance, use personal protection equipment indicated by the Manufacturer, especially when
working on the blade. Before carrying out any type of maintenance, make sure the robot is turned off (see
“Robot Safety Stop”).
SCHEDULED MAINTENANCE TABLE
Frequency Part Type of maintenance Reference
Weekly
Blade
Clean and check the
efciency of the blade. If the
blade is bent or very worn,
replace it
See “Robot Cleaning”
See “Blade Replacement”
Battery charging knobs Clean and remove any rust See “Robot Cleaning”
Contact plates Clean and remove any rust See “Robot Cleaning”
Rain sensor Clean and remove any rust See “Robot Cleaning”
Monthly Robot Clean the robot See “Robot Cleaning”
Once a year and at the end
of the mowing season
Robot
Have the robot serviced at
an authorised service centre
See “Prolonged inactivity
and restarting”