EN - 10
5.1 ASSEMBLY COMPONENTS
Description
1
2 Dashboard cover and steering
3 Driving seat
4
5
6
7
8
catcher bag supports and relative at-
(
9
10
11 Envelope containing:
12
5.1.1 Unpacking
1.
2.
box, including these instructions.
3.
4.
•
• Move the front drive release lever to
•
5.2 STEERING WHEEL ASSEMBLY
1.
2. Fit the hub ( on the steering shaft
(
3. Replace the cap on the dashboard
(
4. on the
hub (
5a. Only for steering wheel of type “I”
- Insert the spacer (
( in the indicated sequence.
5b. Only for steering wheel of type “II” - Fix
( in the indicated sequence.
6a. Only for steering wheel of type “I” -
6b. Only for steering wheel of type “II” -
5.3 SEAT ASSEMBLY
5.4 MOUNTING THE REAR BUMPER
1a. Only for bumper of type "I" - Fit
1b. Only for bumper of type “II”
1. and
(
(
2. Fig. 5.D).
3.
(
((
5.5 SIDE DISCHARGE CHUTE
1.
To Next Page
Loading...
