EN - 12
3.
NOTE
6. CONTROLS
6.1 KEY IGNITION SWITCH
12.A) has 2 positions:
1. Key removed.
No function can be activated.
2. Key fully inserted.
6.2 DRIVE PEDAL
The drive pedal (Fig. 12.A.) activates
1. Forward drive gear:
Increasing the pressure on the
2. Reverse drive gear:
gear. Reducing the pressure on
3. Parking:
serves to decelerate and
until the drive pedal is
once again pressed.
NOTE
6.3 TRANSMISSION ENGAGEMENT
/ DISENGAGEMENT LEVER
lever (Fig. 12.E
1. Drive engaged :
() into the horizontal
position (A).
.
2. Transmission disengaged:
()
The
.
WARNING
on a level surface.
SAFETY INSTRUCTION
6.4 CUTTING HEIGHT ADJUSTMENT
6.4.1 Adjustment lever (only for
models of type “I” and “II”)
The seven positions for this lever,
correspond to various cutting
one of the stop notches.
To Next Page
Loading...
