EN - 14
6.8 TIPPING LEVER FOR GRASS
ONLY FOR MODELS WITH
6.9 PUSHBUTTON PANEL
of the pushbutton panel versions
) described
6.9.1 Pushbutton panel (type “I”
Machine start button
button 13.A)
ON and enables all functions.
NOTE
Cutting means engage and
disengage pushbutton
Press the button 13.B to engage/
•
•
NOTE
restarted (see par. 7.2.2)
Reverse gear cutting
enable button
13.C gives consent
For reverse cutting, engage the
NOTE
A single buzzer signal indicates the
Beacon ON button
Pushing the button 13.D turns
When the beacons are ON,
Attention icon
If icon 13.E
Battery LED
The LEDs . 13.F
indicate the charge level of the
“Ready” icon
"Bluetooth" icon
exchange device are connected.
Controller and/or motor
over-temperature icon
overheating of electrical
Transmission engagement /
disengagement lever icon
engaged (see par. 6.3 and chap. 15).
Operator on-board icon
driving seat (see par. 7.2.2).
To Next Page
Loading...
