EN - 15
Emergency pushbutton icon
activated (see par. 6.5).
6.9.2 Pushbutton panel (type “II”
Machine start button
button 13.A)
ON and enables all functions.
NOTE
to be used (see chap. 7.4).
Cutting means engage and
disengage pushbutton
Press the button 13.B to engage/
•
•
NOTE
restarted (see par. 7.2.2)
Reverse gear cutting
enable button
13.C gives consent
For reverse cutting, engage the
NOTE
A single buzzer signal indicates the
Beacon ON button
Pushing the button 13.D turns
When the beacons are ON,
"CRUISE CONTROL" button
Pressing the button in 13.G
activates/deactivates the
“ function.
•
on the drive pedal (Fig. 12.F).
When the function is active, the
NOTE
cannot be activated in reverse gear.
NOTE
To disengage the device and
reset speed control using the
•
or
•
To Next Page
Loading...
