EN - 33
PROBLEM Cause Remedy
3. Unusual vibrations
during use.
Loose parts.
Contact an Authorised Service Centre
4.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
1.
Increase the cutting height:
2. Slope too steep .
5.
All the other indications
in the push-button panel
functional and visible.
because of:
1.
Increase the cutting height:
6.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
1.
Increase the cutting height:
2. Unsuitable
conditions.
7.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
Current overload
1.
Increase the cutting height:
2. Obstructions that
prevent rotation of
3. The cutting
is full of grass
To Next Page
Loading...
