EN - 34
PROBLEM Cause Remedy
8.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
Increase the cutting height:
9.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
1.
Increase the cutting height:
2. Obstructions that
prevent rotation of
3. The cutting
is full of grass
10.
Pushbutton panel
type “I” and “II”
Pushbutton panel of type
“III”
1.
under stress.
2. Slope too steep .
3.
11.
Pushbutton panel of type
“I” e “II”
Pushbutton panel of type
“III”
not released (not in
neutral position).
pedal is in the neutral position (pedal released).
To Next Page
Loading...
