STIHL 064, 066 17
3.2 Clutch
Top:
1 = Spark plug terminal
2 = Spark plug Top: Top:
Locking strip 0000 893 5902 Clutch
Bottom:
Shroud mounting screws (third screw Bottom: Bottom:
hidden in this view) Locking strip in position Assembly hook 5910 890 2800
To remove and disassemble the clutch:
Troubleshooting chart - see 2.1.
- Remove outer half of air filter - see 11.1.
- Pull terminal off the spark plug and
unscrew the spark plug.
- Take out shroud mounting screws and
remove the shroud.
- Push the locking strip into the spark
plug hole so that "TOP" or "OBEN" is
facing upward.
Important: To avoid the risk of piston
damage, use only the specified locking
strip.
- Remove the clutch drum or chain
sprocket, see 3.1.
- Unscrew clutch from stub of
crankshaft.
Caution: Clutch has left-hand thread.
Unscrew it clockwise.
To Next Page
Loading...
