Stihl 064

STIHL 064, 066 20
Top: Top: Top:
Detaching brake spring Hand guard mounting screw E-clip on cam lever pivot pin
Bottom: Bottom: Bottom:
Removing brake band E-clip on bell crank Detaching spring from pivot pin
- Carefully pry the brake spring off
the anchor pin.
- Pry the brake band out of its seat
in the crankcase and detach it
from the bell crank.
- Remove the E-clip from the cam lever
pivot pin.
- Detach spring from cam lever.
- Pull the cam lever off the pivot pin.
- Remove the spring.
- Take out the hand guard mounting screw.
- Remove E-clip from bell crank pivot pin.
- Pull hand guard with bell crank off the
pivot pins.