Stihl 064

STIHL 064, 066 72
10. CHAIN LUBRICATION
10.1 Pickup Body
Top:
Disconnecting the strainer
Top: Top:
Oil tank filler cap Withdrawing pickup body Bottom:
1 = Hose
Bottom: Bottom: 2 = Connector
Assembly hook 5910 893 8800 Pulling pickup body out of hose 3 = Strainer
Impurities gradually clog the fine - Use assembly hook to withdraw - Use side cutters or similar tool to
pores of the filter with tiny particles the pickup body from the oil tank. remove the strainer from the con-
of dirt. This prevents the oil pump nector.
from supplying sufficient oil to the Note: Do not stretch the oil hose
bar and chain. In the event of prob- too much when withdrawing the - Wash the strainer and pickup
lems with the oil supply, first check pickup body. body in white spirit and, if
the oil tank and the pickup body. possible, blow out with com-
Clean the oil tank if necessary. - Hold the oil hose steady and pull pressed air.
out the pickup body.
- Remove the oil filler cap together - Flush out the oil tank.
with the cap retainer.
Reassemble by reversing the
- Drain the oil tank. disassembly sequence.
Important: Always replace any
damaged parts.