Stihl BGA 100 User Manual

BGA 100
English
11
Nozzle
WARNING
To reduce the risk of injury, operate the
unit only with a properly mounted
nozzle.
Mounting the Nozzle
N Push the nozzle (1) onto the blower
tube (2) as far as mark that suits
your height.
N Rotate the nozzle (1) in the direction
of the arrow and engage it in the
slot (3).
Adjusting the Nozzle
N Rotate the nozzle (1) clockwise as
far as the stop.
N Slide the nozzle (1) to the
appropriate mark on the blower
tube (2) that suits your height.
N Rotate the nozzle (1) in the direction
of the arrow and engage it in the
slot (3).
Removing the Nozzle
N Rotate the nozzle (1) clockwise as
far as the stop.
N Pull the nozzle (1) off the blower
tube (2).
Power supply (mains) voltage and
operating voltage must be the same.
N Insert the plug (1) in the wall
outlet (2).
A self test is performed after the charger
is connected to the power supply. During
this process, the light emitting diode (1)
on the charger lights up green for about
1 second, then red and goes off again.
Assembling the Blower
3
0021BA005 KN
2
1
Connecting Charger to
Power Supply
3901BA015 KN
2
1
1
3901BA019 KN

Stihl BGA 100 Specifications

General

Type	Handheld blower
Power	- W
Airspeed	- km/h
Working type	Blowing
Product color	Black, Orange, White
Working technology	Electric
Battery voltage	36 V

Weight and Dimensions

Weight	2500 g