BGA 100
English
18
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Before performing any work on the blower, move the retaining latch to
ƒ and pull
the connecting cord plug out of the socket.
before starting work
after finishing work or daily
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete unit
Visual inspection (condition) X
Clean X
Controls (retaining latch, trigger switch)
Check operation X
Clean XX
Intake screen
Visual inspection (condition) XX
Clean X
Have replaced by servicing dealer
1)
X
All accessible screws and nuts Retighten X
Battery Visual inspection XXX
Socket
Clean XX
Check function (insert and remove con-
necting cord plug)
X
Connecting cord Visual inspection (condition) X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
To Next Page
Loading...
