BGA 100
English
16
N Mount the nozzle - see "Assembling
the Blower".
N Line up the arrows and insert
connecting cord's plug (1) in the
blower's socket (2).
N Make sure you have a secure and
firm footing.
N Stand upright, hold the blower and
stay relaxed.
N Move the retaining latch (3) to ‚.
N Operate the trigger switch (4).
N Release the trigger (1).
N Move the retaining latch (2) to ƒ.
This locks the trigger switch so that
it cannot be operated – the blower is
switched off.
N Pull connecting cord plug (3) out of
the socket (4) during breaks and
after finishing work.
N Put the blower down so that it does
not endanger others.
N Secure it against unauthorized use.
N Switch off the blower - see
"Switching Off".
N Store the machine in a dry and
secure location
N Keep out of the reach of children
and other unauthorized persons.
Storing the Battery
N Remove the battery from the
machine or charger.
N Store indoors in a dry and secure
location. Keep out of the reach of
children and other unauthorized
persons and protected from
contamination.
N Do not store spare batteries unused
– use in rotation.
N To optimize the life of the battery,
store it with a charge of about 30%.
Storing the Charger
N Removing the Battery
N Disconnect the plug from the wall
outlet.
N Store the charger indoors in a dry
and secure location. Keep out of the
reach of children and other
unauthorized persons and
protected from contamination.
Switching On
Switching Off
Storing the Machine