Stihl BGA 200 - Mounting the AP Battery Bag to the STIHL Battery Belt

0458-812-8621-A
26
English 12 Using a Battery Harness
► Connect the hip pad (8) to the harness using the quick-
release fasteners (5 and 6).
► Adjust the length of the hip pad strap (1) so that the
carabiner (2) is about a hand’s width below the top of your
hip.
► Attach the carabiner to the carrying ring (3) on the power
tool.
12.6 STIHL Battery Belt
12.6.1 Mounting the AP Battery Bag to the STIHL Battery Belt
WARNING
To reduce the risk of injury from tripping or losing control of
the power tool, always secure the connecting cord with the
hook and eye fasteners. Position and secure the connecting
cord so that it will not interfere with proper working technique
or your ability to maintain control of the power tool.
WARNING
Manage the cord to prevent it from contacting the cutting
blades or catching on objects, which could cause you to lose
balance or control of the power tool, resulting in serious
personal injury and property damage.
► Open the hook and eye fastener on the strap (1) and pull
the strap out of the ring (2).
► Pull the strap through the battery belt (3).
► Pull the strap (1) back through the ring (2) and battery
belt (3).
► Fasten the hook and eye fastener.
0000-GXX-4032-A0
5
6
8
3
2
2
1
0000-GXX-B537-A0
1
0000-GXX-3660-A1
3
2
1
3
0000-GXX-3416-A2
1
1