Stihl BGA 200 - During Operation; Using the Blower

0458-812-8621-A
32
English 18 After Finishing Work
17.4 Using the Blower
WARNING
Always wear proper clothing and protective apparel,
including proper eye protection, @ 5.4. Never direct the air
flow toward bystanders. Keep bystanders at least 16 ft.
(5 m) away from the work area, @ 5.6.4. Work carefully and
maintain proper control of the blower.
The blower is designed for single-handed operation with the
right hand.
► Hold the unit firmly with your hand, keeping the handle
cradled between your thumb and fingers.
► Direct the air flow at the edges of the pile of material to be
blown.
NOTICE
Never direct the air flow toward objects such as vehicles or
windows.
Observe all applicable laws, regulations, standards and
ordinances.
18.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the motor and
remove the connecting cord before transporting the blower
or putting it down.
To prepare the blower for transportation or storage:
► Switch off the blower, @ 15.2.
► Remove the connecting cord, @ 14.2.
► If the blower became wet during operation, allow it to dry
separately and completely before charging or storing.
19.1 Blower
When transporting the blower:
► When transporting the blower by hand, carry it by the
control handle.
► When transporting the blower in a vehicle, secure and
position the blower to prevent turnover, impact and
damage.
0000-GXX-4440-A0
18 After Finishing Work
19 Transporting
0000-GXX-B923-A0