Stihl BGA 85 - Storage and Maintenance; Storing the Machine

15BGA 85
: Hold the torsion spring (1) down
and engage it behind the
retaining lug (arrow).
– Positioning the locking lever:
The grip (1) faces the compartment
opening, the retaining edge (2)
points into the battery compartment.
: Fit one locking lever pivot pin in
the bearing point (arrow).
Stop (1) outside the guide.
Both ends (2) of the torsion spring
face outwards.
3905RA016 AM
1
3905RA017 AM
1
2
3905RA018 AM
1
2
2
: Carefully ease the bearing points
apart (arrows) and fit the second
pivot pin (1) in the second
bearing point (2).
: Engage the two ends (1) of the
torsion spring behind the
guides (2).
– Check that both locking levers
move freely.
– Reassemble all other parts in the
reverse sequence.
3905RA019 AM
2
1
3905RA020 AM
1
2
7.4 Spring
Removing
– Remove the cover if necessary,
b 7.2
: Squeeze the spring (1) together,
disengage it from the retaining
lugs (2) and pull it out in the
direction of the compartment
opening.
– Check the spring and replace it if
necessary
Installing
: Push the spring (1) inwards
between the guides (2) and fit it in
the retainer (3).
3905RA021 AM
2
1
3905RA022 AM
1 2
2
3