Stihl BR 700 - 20.3 Inspecting and Maintaining the Nozzle

0458-459-8221-C
30
English 20 Inspection and Maintenance
If you make a warranty claim for a component that has not
been serviced or maintained properly, coverage may be
denied.
20.3 Inspecting and Maintaining the Nozzle
► Shut off the engine, @ 12.
The blower nozzle is manufactured with wear marks to help
the operator identify excessive wear.The wear marks
depicted above must remain visible.
► If the wear marks are no longer visible: Stop working and
have the nozzle replaced.
0000098496_001