BR 800, BR 800 X
English
20
N Move the shutter (4) to the right to
position r (winter operation).
N Fit the filter cover (2) with air
filter (3) in position.
N Insert the screws (1) and tighten
them down firmly.
At temperatures above 70°F (+20 °C)
N Move the shutter (4) to the left to
position r (summer operation).
NOTICE
If the shutter (4) is not moved to
position s at temperatures above 70°F
(20°C), there is a risk of engine running
problems caused by overheating.
NOTICE
With the engine stopped, check the
following parts before starting and clean
if necessary:
– Base plate
– Intake screen between backplate
and engine
Positions of Setting Lever
1 Setting lever
2 Throttle trigger
Position “F”
Engine runs or is ready to start. Throttle
trigger (2) can be moved to any position.
Position “†”
Ignition is interrupted, engine stops. The
setting lever (1) is not locked in this
position. It springs back to position “F”.
The ignition is switched on again.
Fixed throttle
The throttle trigger (2) can be locked in
any position.
To disengage the lock:
N Return the setting lever (1) to
position “F”.
4
0000-GXX-5389-A0
Information Before You Start
To Next Page
Loading...
