BR 800, BR 800 X
English
21
Starting the Engine
N Observe safety precautions.
NOTICE
Start your machine on a clean, dust-free
surface only to ensure that no dust is
sucked in.
N Move the setting lever to F
N Press the fuel pump bulb at least 6
times – even if the bulb is already
filled with fuel.
Cold engine (cold start)
N Turn the choke knob to c.
Warm engine (warm start)
N Turn the choke knob to o.
Also use this setting if the engine has
been running but is still cold.
Cranking
N Place the machine securely on the
ground – make sure that bystanders
are well clear of the nozzle outlet
and
N take the blower tube off the hook on
the blower housing (transport
position).
N Make sure you have a firm footing:
Hold the machine with your left hand
on the housing and put one foot
against the base plate to prevent it
slipping.
Starting / Stopping the
Engine
0000-GXX-5390-A0
0000-GXX-5391-A00000-GXX-6223-A0
0000-GXX-5394-A0
To Next Page
Loading...
Need help?
General
