BR 800, BR 800 X
English
15
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N Set the throttle trigger to the full
throttle position.
N Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
Adjusting the Harness
A Pull the ends of the straps to tighten
the harness.
B Lift the tabs of the adjusters to
loosen the straps.
C Close the buckle by pushing the two
parts together.
D Squeeze the hooks to open the
buckle.
Adjusting the Throttle Cable
Fitting the Harness
To Next Page
Loading...
Need help?
General
