Stihl BR 800 X User Manual

BR 800, BR 800 X
English
14
Removing the Nozzle (BR 800 X)
N Rotate the nozzle (1) in the direction
of arrow as far as the stop.
N Pull the nozzle (1) off the blower
tube (2).
Adjusting the Blower Tube (BR 800 C)
N Loosen the union nut (1).
N Pull the blower tube (2) out to the
required length.
N Tighten the union nut (1).
Wear Mark on Nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Transport Aid
The blower tube can be hooked to the
blower housing for storage and
transport.
N Attach D-ring to the hook on the
blower housing.
WARNING
If the engine is started while the blower
tube is still on the hook, air or dirt
particles can be blown into the user’s
face and eyes.
N Unhook the blower tube before
starting the engine.
NOTICE
If clothing or other objects are hung on
the hook, the intake openings may be
covered and cause the engine to
overheat.
N Use the hook only for hanging up
the blower tube for storage or
transport.
N Do not hang clothing or other items
on the hook.
1
2
0000-GXX-3990-A0
1
0416BA015 KN
2
0416BA009 KN
0000-GXX-5383-A0

Stihl BR 800 X Specifications

General

Brand	Stihl
Model	BR 800 X
Category	Blower
Language	English