BR 800, BR 800 X
English
24
During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If There is a Noticeable Loss of Engine
Power
N Loosen the screws (1).
N Remove the filter cover (2) together
with the air filter (3).
N Remove the air filter (3) from the
filter cover.
N Replace a dirty or damaged air filter
(3).
N Fit the new air filter (3) in the filter
cover (2).
N Fit the filter cover (2) with air
filter (3) in position.
N Insert the screws (1) and tighten
them down firmly.
Operating Instructions Replacing the Air Filter
1
2
3
0000-GXX-5388-A0
To Next Page
Loading...
Need help?
General
