Stihl BR 800 X User Manual

BR 800, BR 800 X
English
32
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Engine
STIHL 4-MIX Engine
Ignition System
Electronic magneto ignition
Fuel System
All position diaphragm carburetor with
integral fuel pump
Blowing Performance
Weight
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit’s air emissions control system,
please refer to the air emissions
systems warranty in this manual.
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Displacement: 4.88 cu.in
(79.9 cc)
Bore: 1.97 in
(50 mm)
Stroke: 1.60 in
(40.7 mm)
Idle speed: 2,500 rpm
Spark plug (resistor
type): NGK CMR 6 H
Electrode gap: 0.02 in (0.5 mm)
Fuel tank capacity: 67.6 fl.oz. (2.0 l)
Blowing force: 41 N
Air velocity: 199 mph
(89 m/s)
Air flow rate: 912 cf/min
(1550 m
3
/h)
Maximum air velocity: 239 mph
(107 m/s)
Maximum air flow rate
without blower tube:
1192 cf/min
(2025 m
3
/h)
dry:
BR 800 C: 25.8 lbs (11.7 kg)
BR 800 X 23.1 lbs (10.5 kg)
Maintenance and Repairs

Stihl BR 800 X Specifications

General

Brand	Stihl
Model	BR 800 X
Category	Blower
Language	English