EasyManuals Logo

Stihl FS 130 User Manual

Stihl FS 130
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #55 background imageLoading...
Page #55 background image
54
English / USA
FS 130, FS 130 R
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
STIHL Single cylinder four-stroke
engine with gasoil lubrication
Displacement: 2.22 cu.in (36.3 cm
3
)
Bore: 1.69 in (43 mm)
Stroke: 0.98 in (25 mm)
Engine power to ISO 8893:
1,9 bhp (1,4 kW) at 8,500 rpm
Idle speed: 2,800 rpm
Engine cutoff speed (nominal)
10,500 rpm
Max. output shaft speed (cutting tool)
7,500 rpm
Valve clearance
Inlet valve: 0.004 in (0.10 mm)
Exhaust valvel: 0.004 in (0.10 mm)
Fuel tank capacity
18.0 fl.oz (0.53 l)
Spark plug (suppressed)
NGK CMR 6 H
Electrode gap 0.02 in (0.5 mm)
Rewind Starter
Starter rope 0.12 in dia., 33.46 in long
(3.0 mm dia., 850 mm long)
Weight
(without cutting tool and deflector)
FS 130 with bike handle:
13.0 lb (5.9 kg)
FS 130 R with loop handle:
12.3 lb (5.6 kg)
Overall lenght
(without cutting tool)
71 in (1,800 mm)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Specifications
Special Accessories

Other manuals for Stihl FS 130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl FS 130 and is the answer not in the manual?

Stihl FS 130 Specifications

General IconGeneral
Engine Type4-MIX
Displacement36.3 cc
Sound Power Level109 dB(A)
Weight5.9 kg
Fuel Capacity0.53 liters
Cutting Diameter420 mm
Maximum Recommended Cutting Diameter (with blade)250 mm
Maximum Recommended Cutting Diameter (with line head)420 mm
Engine Power1.4 kW (1.9 bhp)

Related product manuals