FS 160, FS 220, FS 280, FS 290
English
81
FS 220, FS 280, FS 290
N Attach the carabiner (2) to the 
perforated strip (5).
N Determine correct attachment point 
– see "Balancing the Machine".
Throwing Off the Machine
WARNING
The machine must be quickly thrown off 
in the event of imminent danger. 
Practice removing and putting down the 
machine as you would in an emergency. 
To avoid damage, do not throw the 
machine to the ground when practicing.
Practice quickly opening the locks, 
removing the straps from your shoulders 
and disconnecting the carabiner (spring 
hook).
The unit is balanced differently, 
depending on the cutting attachment 
used.
N With the unit suspended from the 
harness, see how it is balanced and 
change attachment point as 
necessary:
Mowing attachments
Mowing heads, grass cutting blades and 
brush knives and shredder blades 
should just touch the ground.
Circular saw blades
Circular saw blades should "hover" 
about 20 cm(A) above the ground.
Controls
1 Throttle trigger interlock
2 Throttle lever
3 Slide control
Positions of slide control
4STOP-0 – engine off – the ignition is 
switched off
5 F – normal run position – the engine 
is running or can start
6START – the ignition is switched on 
– the engine can start
Balancing the Machine
Starting / Stopping the 
Engine
3
STOP
56
4
7
002BA182 KN
1
2
START
STOP-