Stihl FS 300 Instruction Manual

FS 300, FS 350, FS 400, FS 450, FS 480
English
12
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
3 STIHL AutoCut 40-4
1)
4 STIHL TrimCut 41-2
5 STIHL PolyCut 40-3
Metal cutting attachments
6 Grass cutting blade 230-4
7 Grass cutting blade 255-8
8 Grass cutting blade 250-40 Spezial
9 Brush knife 305-2 Spezial
10 Brush knife 300-3
11 Shredder blade 270-2
12 Scratcher tooth circular
saw blade 200
13 Chisel tooth circular saw blade 200
14 Scratcher tooth circular
saw blade 225
2)
15 Chisel tooth circular
saw blade 225
2)
16 Carbide tipped circular
saw blade 225
2)
Deflectors, limit stops
Deflectors
17 Deflectoronly for mowing heads
18 Deflector with
19 Skirt and blade for mowing heads
(see "Mounting the Deflector").
20 Deflector without skirt and blade for
mowing tools 6 to 10
21 Deflector for shredder blade
Limit stops
22 Limit stop for circular
saw blades 200
23 Limit stop for circular
saw blades 225
Harnesses
24 Full harness must be used
25 Deluxe full harness
N Hold the lower clamp (1) steady.
N Unscrew and remove the clamping
screw (2). The clamps are loose
once the clamping screw has been
removed.
N Remove the upper clamp (3) from
the lower clamp.
For safety reasons only the
cutting attachment and deflectors
or limit stops shown in each row of
the table may be used together.
No other combinations are
permitted because of the risk of
accidents.
1)
for FS 450, 480 only
2)
for FS 400, 450, 480 only
Non-metal grass cutting blades,
brush knives, shredder blades
and circular saw blades are not
approved.
Mounting the Bike Handle
3
1
2
256BA001 KN

Stihl FS 300 Specifications

General

Engine Type	2-stroke
Shaft Type	Straight
Sound Pressure Level	98 dB(A)
Sound Power Level	109 dB(A)
Displacement	30.8 cc
Fuel Tank Volume	0.64 l
Cutting Attachment	Metal blade