20 Combinations of Cutting Attachments, Deflectors and Carrying
Systems
20.1 Combinations of Cutting Attachments, Deflectors and Carrying Systems
Cutting attachment Deflector Carrying System
–
AutoCut 56-2 mowing head
–
DuroCut 40-4 mowing head
–
Mowing head TrimCut C 52-2
–
Deflector for mowing heads with diame‐
ter 480 mm
–
Deflector for mowing heads with diame‐
ter 560 mm
–
Full harness with
quick release sys‐
tem
–
Grass cutting blade 250-32
"Special" (250 mm dia.)
–
Grass cutting blade 250-40
"Special" (250 mm dia.)
–
Grass cutting blade 255-8
(255 mm dia.)
–
Deflector for metal cutting attachments
–
Brush knife 305-2 "Special"
(305 mm dia.)
–
Brush knife 350-3 (Ø 350 mm)
–
Brush knife 350-3 "Special"
(350 mm dia)
–
Deflector for metal cutting attachments
–
Shredder blade 320-2 (320
mm dia.)
–
Guard for shredder blades
–
Circular saw blade 225-48
scratcher tooth (225 mm dia.)
–
Chisel tooth circular saw blade
225-22 HP (225 mm dia.)
–
Circular saw blade 225-24,
chisel tooth (225 mm dia.)
–
Circular saw blade 225-36,
carbide (225 mm dia.)
–
Limit stop with diameter 225 mm
–
Circular saw blade 250-26,
chisel tooth (250 mm dia)
–
Limit stop with diameter 250 mm
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Trimmer
Contact your STIHL servicing dealer for informa‐
tion on disposal.
► Dispose of the trimmer, deflector, cutting
attachment, fuel mix, gasoline, two-stroke
engine oil, accessories and packaging in
accordance with local regulations and environ‐
mental requirements.
23 EC Declaration of Con‐
formity
23.1 Brushcutter STIHL FS 511 C-
M, FS 561 C-M
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
–
Category: Brushcutter
–
Manufacturer's brand: STIHL
–
Type: FS 511 C-M, FS 561 C-M
–
Serial number: 4148
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
20 Combinations of Cutting Attachments, Deflectors and Carrying Systems English
0458-856-0121-A. VA0.B21. 23
To Next Page
Loading...
Need help?
General
