EasyManua.ls Logo

Stihl FSA 45 - 8 Before Starting Work; Preparing the Trimmer for Operation; 9 Charging the Trimmer; Charging

Stihl FSA 45
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0458-718-8221-A
18
English
8 Before Starting Work
Unintentional starting may result in personal injury or
property damage. To reduce the risk of personal injury
and property damage from unintentional starting:
Use of parts that are not authorized or approved by STIHL
may cause serious or fatal injury or property damage.
STIHL recommends that only identical authorized
STIHL replacement parts be used for repair or
maintenance.
To reduce the risk of electric shock:
Unplug the charger from the wall outlet before
inspecting or cleaning the charger.
Regularly check the charger and ensure that the
insulation of the power supply cord and plug are in
good condition and show no signs of aging
(brittleness), wear or damage.
Replace the charger if the power supply cord
becomes worn or damaged. The power supply cord
cannot be repaired or replaced.
To reduce the risk of short circuit and fire:
Keep the charging socket and power supply cord
connector free of foreign matter. Clean as necessary
with a dry cloth or soft, dry brush.
Improper storage can result in unauthorized use, damage
to the trimmer and charger, and an increased risk of fire,
electric shock and other personal injury or property
damage.
Remove the activation key from the trimmer before
storing. Store the activation key away from the
trimmer in a safe place that is inaccessible to
children and other unauthorized users.
Never store the trimmer with the activation key
inserted.
Before storing, always unplug the charger from the
wall outlet and remove the charger from the trimmer.
Store the trimmer and charger indoors in a dry,
secure place that cannot be accessed by children or
other unauthorized users.
Store the trimmer only within an ambient
temperature range of 32°F to 122°F (0°C to 50°C).
8.1 Preparing the Trimmer for Operation
Before starting work:
Fully charge the trimmer, @ 9.
Mount the deflector, @ 11.1.
Mount the trimmer line or polymer blades on the mowing
head, @ 11.2.1 or @ 11.2.2.
Mount the trimmer's loop handle, @ 11.3.
Adjust the length of the drive tube, @ 12.1.
Adjust the trimmer's loop handle, @ 12.2.
Check the condition of the mowing head and cutting
attachment, @ 15.2.
Check the controls for proper function and condition,
@ 15.1.
9.1 Charging
WARNING
Read and follow the trimmer and charger safety precautions
and instructions in this manual, @ 5.5 and @ 6. Be alert for
signs that the integrated battery may be damaged. To
reduce the risk of fire and explosion, never use or charge a
trimmer with a housing that is cracked, deformed,
excessively hot, leaking battery fluid or otherwise damaged,
@ 5.6.
Remove the activation key before
inspecting the trimmer or carrying out
any cleaning, maintenance or repair
work, before storing, and any other time
the trimmer is not in use.
8 Before Starting Work
9 Charging the Trimmer

Table of Contents

Other manuals for Stihl FSA 45

Related product manuals