Stihl FSE 31 - Adjusting the Handles; Shaft Length Adjustment (FSE 41); Control Handle Adjustment (FSE 41)

FSE 31, FSE 41
English
11
N Push home the button (1) on the
spool as far as stop.
N Pull the ends of the nylon line (2) out
of the spool.
If the spool is empty, see "Replacing
Nylon Line".
Adjusting Length of Shaft (FSE 41 only)
N Press in the lock button (1).
N Pull the control handle (2) upwards
on the shaft (3) and engage it in one
of the 3 positions: A, B or C
Adjusting Control Handle (FSE 41 only)
N Only possible in positions A and C.
N Press in the lock button (1).
N Rotate the control handle (2) 180°
on the shaft (3) and engage it in one
of the 2 positions: 0° or 180°
280BA019 KN
1
2
2
Adjusting the Handles
2
1
280BA008 KN
3
A
B
C
2
1
280BA021 KN
3
A
C