FSE 31, FSE 41
English
14
N Release the trigger switch.
WARNING
Note that the cutting attachment
continues to run for a short period after
you let go of the switch – flywheel effect.
During longer work breaks – disconnect
the plug from the wall outlet.
When the power tool is not in use, store
it in such a way that it does not endanger
others.
Secure it against unauthorized use.
For periods of 3 months or longer
N Thoroughly clean the machine,
especially the cooling air inlets.
N Take out the spool, clean it and
check it for damage.
The resilience and service life of the
nylon line can be increased by storing it
in a container filled with water.
N Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Preparations
N Switch off the trimmer.
N Disconnect the plug from the wall
outlet.
N Turn the trimmer on its back.
Removing Remaining Nylon Line
In normal operation, the supply of nylon
line in the head is used up completely.
Removing the Spool
N Hold the housing (1) steady.
N Press in the tabs (2) and remove the
cover (3).
N Pull the spool (4) out of the housing.
Switching Off Storing the Machine Replacing Nylon Line
To Next Page
Loading...
