Stihl FSE 81 - Fitting the Harness; Harness Wearing and Adjustment; Strain Relief and Power Connection

14
English
FSE 60, FSE 71, FSE 81
: Insert the unit’s plug (1) into
extension cord coupling (2).
Strain Relief
: Make a loop (3) in the extension
cord and pass it through the
opening (4).
: Slip the loop over the hook (5) and
pull it tight.
: Connect the extension cord plug to
a properly installed power outlet.
A Harness is available as special
accessory.
Wear the harness over your left shoulder
and adjust its length so that the spring
hook lies against your right hip.
The open side of the hook should face
away from your body. Attach the spring
hook to the carrying loop.
238BA008 KN
1
2
4
238BA009 KN
5
3
Fitting the Harness